My Cart: 0 item(s)
Puller & Splitters By Size
- This tool includes 1 Large Rod and 3/4 inch and 1-inch remover.
- Fits most 2000 and later Harley-Davidson Motorcycle wheels. Driving wheel bearings out can be a hair-pulling task, especially without damaging an expensive wheel.
- This set makes this job almost effortless.
- This set works on virtually any size wheel bearing used on motorcycles and ATVs.
- Safe and Easy.
- Remove bearings in seconds.
- Each remover has a tapered end so part of the remover will slip inside the bearing.
- To use this tool you simply put the proper size remover in the bearing, then flip Wheel & Bearing over so the Remover is against the floor, then take the rod tool insert into remover and tap firmly into place (The remover has a slot in it for the rod tool to slide into).
- Once you have the rod firmly in place simply lift the wheel and bearing off the ground and tap again and the bearing will fall out.
- When the remover is against the ground and tapped on, the remover is spread apart tight against the bearing, then when you lift off the ground and tap, it pushes the bearing out of the race.
| Weight: | 2.00 lb |
| Brand: | Pit Posse |
| Warranty: | Lifetime |
Warning: Cancer and Reproduction Harm - www.P65Warnings.ca.gov