Pit Posse Trailer Door Slider Plate

I like this ramp, the only issue is the rivets on the piano hinge. They are slightly too long. I wanted this floor gap cover positioned in a way that it went up and down with the door. The rivets touched the floor resulting in the floor gap cover not making contact with the ramp door. Positing the gap cover so that the rivets hung off the flooring so that contact with the ramp would be made, resulted in the cover folding backward when the ramp door closed. My solution was to grind the rivets down between a 1/16 to 1/8 of an inch. Problem solved. Only took a couple of extra minutes to do. Everything else about this gap cover is great and I consider it money well spent.

This is a well made replacement ramp for my motorcycle trailer. HOWEVER, before I even got to use the trailer with the trike, one of the rivets came off where the trailer meets the hinge. I just dug around in my “stuff” and found a couple washers and a nut and lock bolt and “fixed it”. Better than the original. Took to long to ship and install it to send it back and wait again for another one in my humble opinion.